Which Jaquar Concealed Valve Do I Need? (ALD-CHR-233N / 441 / 87233C)

Short answer

Every wall-mounted (concealed) Jaquar mixer or diverter is two products: the visible trim you see on the wall, and a hidden valve body buried inside it — sold separately. Which body you need depends on three things: what the fitting does (single-lever mixer vs 2-way vs 3-way diverter), the flow type (normal vs high flow), and your pipe size. The common Jaquar bodies come from the Allied (ALD) range — e.g. the single-lever concealed body family around ALD-CHR-233N, and divertor bodies like the 441 and 87233C families. If you send us the model code of your visible fitting on WhatsApp (+91 79770 04273), we'll confirm the exact matching body before you order — that's the safe way to do it.

In detail

Why concealed fittings come in two parts

A concealed mixer or diverter hides all plumbing inside the wall: only the lever or knob plate shows. The engineering part — the brass valve with the cartridge, connected to your hot/cold lines — sits in the wall cavity and is installed during tiling, weeks or months before the visible trim goes on. Jaquar therefore sells them separately:

Getting the body wrong is expensive: it's cemented into a finished, waterproofed wall. This is the one purchase in a bathroom where you should double-check the pairing before paying.

The three questions that decide your valve

1. What does the fitting do?

• Single-lever concealed mixer (one lever controls hot/cold and flow, typically feeding a bath spout or shower): needs a single-lever concealed body. Jaquar's standard family here is the Allied ALD-…-233N-type body (normal flow) and its high-flow sibling for larger showers and bath fillers.
• 2-way diverter (switch between two outlets — say, overhead shower and hand shower): needs a 2-way divertor body, e.g. the Allied 441-family.
• 3-way / 4-way diverter (three or more outlets — overhead + hand shower + body showers): needs the matching 3-way/4-way divertor body (the 87233C-type family serves the higher-flow divertor trims).

2. Normal flow or high flow? Overhead rain showers above roughly 8 inches, multiple body jets, or bath fillers want a high-flow body; a basic shower or spout runs fine on normal flow. The trim you choose states its flow type — the body must match it. In our catalog, trims say it explicitly: ALI-SSF-85783NK is a 3 way diverter Alive normal flow, so it pairs with a normal-flow divertor body.

3. Pipe size (½" vs ¾"). High-flow bodies typically run on ¾" lines. Your plumber decides this at the plumbing stage — which is why the body should be bought with the plumber's sign-off, not after.

How the code pairing works

The visible trim carries the series design (Alive, Kubix Prime, Opal Prime…), but the buried body is series-agnostic — that's why bodies live in Jaquar's Allied (ALD) range. One ALD body accepts trims from many series, so you can pick the design you like without changing the plumbing underneath. Two rules of thumb:

• Match function + flow, not series. An Alive 3-way normal-flow trim and a Kubix Prime 3-way normal-flow trim can sit on the same divertor body family.
• Never mix flow types. A high-flow trim on a normal-flow body throttles your expensive rain shower; the reverse can leak or feel loose.

Jaquar occasionally revises body families (suffix letters change), so treat any specific body code — including the ones in this guide — as a family name to be confirmed against your exact trim code. Confirmation takes us two minutes on WhatsApp; getting it wrong costs a wall.

Typical prices

Concealed valve bodies are the cheap half of the pair. In our catalog, branded concealed/divertor valve bodies run from around ₹2,900 (Essco Allied 2-way divertor body ALE-CHR-055) into the ₹6,000–12,500 band for premium imports (e.g. Grohe 2-way and 3-way bodies at ₹9,030–₹12,509). Angle valves and stop cocks that feed basins and geysers are separate, smaller items — from about ₹1,000 (Continental Prime COP-CHR-057PM) to ₹1,740+ for designer ranges like Alive (ALI-CHR-85053).

The buying sequence that avoids mistakes

1. Pick your visible trims first (design, finish, how many outlets you want in the shower).
2. List their exact model codes — see how to read a Jaquar model code.
3. Send the codes to us or your plumber to derive the required bodies, flow types and pipe sizes.
4. Buy and install the bodies at plumbing stage; buy trims at finishing stage. (Buying both together is fine too — just hand the bodies to the plumber early.)
5. Keep the GST invoice: Jaquar's service network identifies concealed parts by model code when a cartridge needs service years later.

We stock the visible trims and the concealed bodies as separate catalog items — browse concealed valves for bodies, and mixers & diverters for the trims they serve.

Related products

• Concealed valves & bodies
• Jaquar mixers & diverters
• Jaquar concealed valves category
• Guide: How to read a Jaquar model code
• Guide: Concealed vs exposed shower systems