Bathroom Fittings for Builders & Contractors in Mumbai
Project quotes per flat against a GST invoice, from a 4,479-product catalogue across Jaquar, Essco, Nirali, Franke, Kohler, Grohe and Cera. Indicative per-flat costs ₹28,000-₹42,000 value, ₹55,000-₹85,000 mid, ₹1,20,000+ premium.
Updated 2026-08-21 · Padmavati Ceramics - Authorized Jaquar Dealer
Short answer
For project quantities we quote per-flat, against a GST invoice, from a 4,479-product catalogue across Jaquar, Essco, Nirali, Franke, Kohler, Grohe and Cera. The practical advice for any builder, contractor or redevelopment society in Mumbai: do not specify one brand throughout. A mixed specification — a recognisable brand on the fittings buyers touch, value range on everything hidden — typically cuts 20–30% off the per-flat fittings cost without changing what a buyer notices at handover. Send a per-flat fitting list and flat count on WhatsApp to +91 79770 04273 for a project quote.
In detail
What we can supply
We are a dealer with over 20 years on Chandavarkar Road, not a marketplace listing. For a project that means one point of contact, consistent pricing across phases, and a real person who can tell you when a code is hard to source.
The per-flat specification that actually works
The mistake on most project specs is treating all fittings as one line item. Buyers do not experience them that way. They notice the basin mixer and the shower; they never see the angle valve.
Indicative per-flat fitting cost
Fittings only — no sanitaryware, tiles, labour or civil work.
These scale steeply with flat count, which is exactly why the mixed specification matters. On a 60-flat redevelopment, a ₹4,000 per-flat saving on invisible components is ₹2,40,000.
Why Essco is the right value answer
For project work the temptation is an unbranded fitting at the lowest price. The failure mode is predictable and expensive: it is not the finish, it is the cartridge, and there is no service network behind it. A drip in flat 704 eighteen months after handover becomes your problem.
Essco is the Jaquar Group's own value range — ceramic-disc quarter-turn cartridges, Jaquar Group manufacturing, the same nationwide service network, and a claimable warranty position with a GST invoice.
Full list: Essco price list 2026.
Essco is chrome only, which for project work is an advantage rather than a limitation — chrome is the lowest-maintenance finish there is, and it is what you want in a flat you are handing over.
Specification notes that prevent site problems
Concealed vs exposed. Concealed systems need the valve body specified, ordered and on site before tiling. Getting this wrong on one flat is annoying; getting it wrong on forty is a programme delay. If the design does not require concealed, exposed fittings on wall points are faster, cheaper and easier to service later. See concealed vs exposed and which concealed valve.
Kitchen sink vs cabinet. Fix the base cabinet width in the kitchen drawing and specify the sink against it, not the other way round. A 24-inch cabinet will not take a 34 x 20 inch double bowl. Kitchen sink size guide.
Water conditions on site. In the MBMC, VVCMC and borewell-fed belts — Mira Road, Bhayandar, Vasai-Virar, parts of Thane — specify chrome and showers with cleanable silicone nozzles. Matt and PVD finishes generate handover complaints in hard water that are maintenance, not defects.
Pressure. In pump-fed towers, thermostatic controls behave properly and large rain heads work. On gravity-fed low-rise, both disappoint. Specify to the building, not the brochure.
One finish per flat. Mixed finishes within a bathroom are the commonest snag-list item and cost nothing to avoid at specification stage.
How to get a project quote
Send this on WhatsApp to +91 79770 04273:
- Flat count and phases, if any.
- Per-flat fitting list — bathrooms, kitchen, and what is fitted where.
- Tier — value, mid or premium — or let us propose one against a target per-flat figure.
- Site conditions — pump-fed or gravity, and whether the water is borewell-supplemented.
- Programme dates, so deliveries can be staged rather than stored.
We will come back with a per-flat and total figure, with model codes on every line so it can be compared against any other quote. If your existing quote is from elsewhere, send it and we will price it code by code.
Redevelopment societies
The same applies to society redevelopment committees buying directly. Committees usually get the best result by fixing a per-flat fittings allowance, letting us propose the specification against it, and allowing members to upgrade individually at their own cost — which we can handle as separate orders against the same specification.
Related products
FAQ
Do you supply bathroom fittings for building projects in Mumbai?
Yes. Send a per-flat fitting list and flat count on WhatsApp to +91 79770 04273 for a project quote against a GST invoice. We are an authorized Jaquar, Essco and Nirali dealer with over 20 years in Borivali West, and also supply Kohler, Grohe, Cera and Franke.
What do bathroom fittings cost per flat for a project?
For two bathrooms and a kitchen, fittings only: roughly ₹28,000-₹42,000 at the value tier, ₹55,000-₹85,000 mid, and ₹1,20,000+ premium. These scale steeply with flat count, which is why a mixed specification matters.
Which brand should a builder specify?
Not one brand throughout. Specify a recognisable brand on the fittings buyers touch - the primary bathroom basin mixer and shower - and Essco on everything hidden or secondary. Essco is the Jaquar Group's value range with the same service network and ceramic-disc cartridges, which unbranded fittings do not have.
Do you supply redevelopment societies directly?
Yes. Committees usually get the best result by fixing a per-flat fittings allowance, letting us propose a specification against it, and allowing members to upgrade individually at their own cost as separate orders against the same spec.
Need help choosing? Talk to a real dealer.
We've sold genuine Jaquar & Essco fittings in Borivali for 20+ years. Get a recommendation and best price.